Volkswagen Passat

Note that you might need to turn the ignition off and back on twice for the customization to take effect.

You may also need to reset your 'Lights' settings to 'Factory defaults' in your infotainment system for this customization to work.

You must activate "acoustic confirmation" in your infotainment system for this customization to work.

You must activate "acoustic confirmation" in your infotainment system for this customization to work.

Which start screen logos are supported is dependent on the module's firmware. Please note that setting a start screen logo which isn't supported may cause a "01543 - incorrectly coded" fault code - returning the original logo should fix the issue.

If this customization doesn't have any effect, please try resetting your infotainment to its factory settings.

Enabling this mode can be used for storage/transportation purposes. Note that when the mode is enabled your keyfob and alarm will be deactivated!

To disable the start/stop system, set the voltage value to over 12 volts. You won't get any indication that the system is off.

You won't get any indication that the system is off.

This setting will only work if your car has an active rear wing (Audi TT and TTS). To fix the spoiler in the raised/lowered position, first press the spoiler's button on selected position, then use fix rear wing function.

To enable this option, the climate control temperature with remote start must be set to a fixed value.

Note that you might need to turn the ignition off and back on twice for the customization to take effect.

Which start screen logos are supported is dependent on the module's firmware. Please note that setting a start screen logo which isn't supported may cause a "01543 - incorrectly coded" fault code - returning the original logo should fix the issue.

You must also enable Scandinavian DRL: daytime running lights activate taillights and parking lights for this customization to work.

If activating this setting, make sure that Bluetooth availability is set to ON.

To use this retrofit setting, your infotainment unit must support CarPlay and have a retrofitted USB port compatible with CarPlay, along with a CarPlay license.

Please note that this customization requires infotainment reboot.

This customization requires that your car is equipped with a satellite navigation system.

Please note that this customization requires infotainment reboot.

You also need to enable TP and RDS in your radio's menu for this to work. Also keep in mind that you might need to wait an hour or so for the feature it to start receiving messages.

Note that you need to enable all steps for this to work.

Note that you need to enable all steps for this to work.

For this setting to work, all steps of "Turn off daytime running lights ("wink") when turn signal is on" setting has to be enabled for both left and right sides.

Note that you need to enable all steps for this to work.

If you are activating this setting make sure that the brightness option for it is above 0.

For this setting to work, all steps of "Turn off daytime running lights ("wink") when turn signal is on" setting has to be enabled for both left and right sides.

You may also need to reset your 'Lights' settings to 'Factory defaults' in your infotainment system for this customization to work.

You may also need to reset your 'Lights' settings to 'Factory defaults' in your infotainment system for this customization to work.

This customization isn't applicable for cars produced for the North American market (USA & Canada).

This customization isn't applicable for cars produced for the North American market (USA & Canada).

This customization is only applicable for cars produced for the North American market (USA & Canada).

This customization is only applicable for cars produced for the North American market (USA & Canada).

This customization is only applicable for cars produced for the North American market (USA & Canada).

This customization is only applicable for cars produced for the North American market (USA & Canada).

If you are activating this setting make sure that the brightness option for it is above 0.

If you are activating this setting make sure that the brightness option for it is above 0.

If you are activating this setting make sure that the brightness option for it is above 0.

If you are activating this setting make sure that the brightness option for it is above 0.

Adjust the light brightness percentage from 0 to 100.

WARNING: The proper functioning of this setting depends on the start/stop button's placement! It operates correctly when the start/stop button is placed close to the gear lever in the center console. If the button is located on the steering wheel, enabling this setting will result in blinking buttons near the gear lever.

WARNING: The proper functioning of this setting depends on the start/stop button's placement! It operates correctly when the start/stop button is placed close to the gear lever in the center console. If the button is located on the steering wheel, enabling this setting will result in blinking buttons near the gear lever.

If this customization doesn't have any effect, please try resetting your infotainment to its factory settings.

You must activate "acoustic confirmation" in your infotainment system for this customization to work.

You must activate "acoustic confirmation" in your infotainment system for this customization to work.

Note that this works only if your power mirror switch is set to control the passenger-side mirror.

This setting only applies to cars that have a rear view camera installed.

Note that you need to enable all steps for this to work.

Note that you need to enable all steps for this to work.

Note that you need to enable all steps for this to work.

Note that you need to enable all steps for this to work.

Note you may also need to enable opening/closing windows via remote for this to work.

Note you may also need to enable opening/closing windows via remote for this to work.

This customization may fail to save on some cars. If it does, that means your car doesn't support it.

You must also enable all other comfort open/closing-related customizations for this to work.

If this customization doesn't have any effect, please try resetting your infotainment to its factory settings.

Only set this step if you have electric seat adjustment / mirror / steering wheel.

Only set this step if you have electric seat adjustment / mirror / steering wheel.