Gauge needle sweep at startup
Note that you might need to turn the ignition off and back on twice for the customization to take effect.
Gauge needle sweep at startup (method B)
Developer menu screen in MMI via holding MENU for ~10 seconds (req. Discover Pro)
Start screen logo (infotainment)
None
Type 1
Type 2
Type 3
Type 4
Type 5
Type 6
Type 7
Type 8
Type 9
Type 10
Type 11
Type 12
Type 13
Type 14
Type 15
Which start screen logos are supported is dependent on the module's firmware. Please note that setting a start screen logo which isn't supported may cause a "01543 - incorrectly coded" fault code - returning the original logo should fix the issue.
Start screen logo (instrument cluster)
Type 1
Type 2
Type 3
Type 4
Type 5
Type 6
Type 7
Type 8
Tachometer highlight mode
Instrument cluster LCD background
Instrument cluster lights always active
Enabled
Disabled
Not available
You must also enable Scandinavian DRL: daytime running lights activate taillights and parking lights for this customization to work.
Driver information system (DIS) display
Lap timer (if equipped) (method B)
Enabled
Disabled
Not available
This timer is visible in certain pages that can be unlocked with the Dashboard view pages settings, and the timer can be found by changing the currently viewed parameter with the steering wheel arrows.
Maximum distance interval until inspection
Maximum time between time-dependent inspections
Allow enabling oil temperature display via MMI
Efficiency program display
Show digital speed in dashboard (BC)
Bluetooth functions in MMI
If activating this setting, make sure that Bluetooth availability is set to ON.
Bluetooth headphones
If activating this setting, make sure that Bluetooth availability is set to ON.
Overlay car overview when rear camera is activated (requires infotainment reboot)
USB configuration
Off
Charging only
Charging & data
iPhone support
To use this retrofit setting, your infotainment unit must support CarPlay and have a retrofitted USB port compatible with CarPlay, along with a CarPlay license.
Navigation compass display
Compass display position
Right of the time display
Left of the time display
Ambient temperature display
Allow "Car" settings in MMI while car is in motion
Allow "Tuner" settings in MMI while car is in motion
Yes
No (variant 1)
No (variant 2)
No (use with VW Jetta only)
Allow "Media" settings in MMI while car is in motion
Yes
No
No (use with VW Jetta only)
Allow "Phone" settings in MMI while car is in motion
Yes
No
No (use with VW Jetta only)
Show "Follow traffic regulations" disclaimer in infotainment
Show AM frequency in infotainment (req. infotainment reboot)
Activate subwoofer and center speaker output pins
This customization requires that your car is equipped with a subwoofer.
Average fuel consumption calibration
Driving school mode for MIB2 (step 1 of 3)
Driving school mode for MIB2 (step 2 of 3)
Driving school mode for MIB2 (step 3 of 3)
Please note that this customization requires infotainment reboot.
"Offroad information" screen in MIB (req. MIB2 and Navigation) (step 1 of 3)
This customization requires that your car is equipped with a satellite navigation system.
"Offroad information" screen in MIB (req. MIB2 and Navigation) (step 2 of 3)
"Offroad information" screen in MIB (req. MIB2 and Navigation) (step 3 of 3)
Please note that this customization requires infotainment reboot.