Ford Puma (crossover)

Note that this setting only works if your car is equipped with an LED DRL bulb.

This setting allows you to access a menu or customization within the "Vehicle" menu on the infotainment screen. To ensure it works, also activate the "Enable the "Driver Assistance" menu in the infotainment display" setting. Note that some customizations, although displayed on the infotainment screen, must be activated in the corresponding category to take effect. Additionally, although some settings are displayed on the infotainment screen, they may not be available for the specific vehicle.

This setting enables a menu in the instrument cluster (Settings > Vehicle Settings). "Settings menu in the instrument cluster" has to be enabled (if present).

This setting is for cars without Keyless Go. It activates a warning when you open the driver’s door if the key remains in the ignition without being turned or is turned to the "Accessory" position (Position 1). The key should not be turned to the "Ignition" or "Engine Start" position.

This setting enables menu or customization within the 'Driver assistance' menu on the infotainment screen. To ensure that this customization takes effect, also activate the "Enable 'Driver assistance' menu in the infotainment display" setting. Note that some customizations, although displayed on the infotainment screen, must be activated in the corresponding category to be enabled.

This setting allows you to access a menu or customization within the "Vehicle" menu on the infotainment screen. To ensure it works, also activate the "Enable the "Driver Assistance" menu in the infotainment display" setting. Note that some customizations, although displayed on the infotainment screen, must be activated in the corresponding category to take effect. Additionally, although some settings are displayed on the infotainment screen, they may not be available for the specific vehicle.

This is a retrofit setting that requires a front driver assist camera and enables a menu in the instrument cluster, where the feature can be configured. "Settings menu in the instrument cluster" has to be enabled (if present).

This setting enables an option in the "Driver Assistance" menu of the instrument cluster, where the feature can be configured. "Settings menu in the instrument cluster" has to be enabled (if present).

This setting enables an option in the "Driver Assistance" menu of the instrument cluster, where the feature can be configured. "Settings menu in the instrument cluster" has to be enabled (if present).

This setting enables menu or customization within the 'Driver assistance' menu on the infotainment screen. To ensure that this customization takes effect, also activate the "Enable 'Driver assistance' menu in the infotainment display" setting. Note that some customizations, although displayed on the infotainment screen, must be activated in the corresponding category to be enabled.

This setting unlocks hidden options in the instrument cluster.

This setting enables a new information screen in the instrument cluster (Settings > Information).

This setting enables a new information screen in the instrument cluster (Settings > Information).

This setting enables an option in the instrument cluster (Trip Computer > Configure View), where the feature can be configured.

This setting enables an option in the instrument cluster on the "My View" screen, where the feature can be configured.

For this customization to take effect, you'll also need to select the appropriate vehicle variant from the 'User theme (infotainment) (step 1 of 2)' setting.

This setting may affect a minimal number of icons. In some cases, it only affects the "Settings" icon.

This setting works only on cars with manual transmission.

This setting works only on cars with manual transmission.

If you have incorrect values in the navigation after accessing the climate control menu, change the type in 'Navigation repeater format type'.

If you have incorrect values in the navigation after accessing the climate control menu, change the type in 'Navigation repeater format type'.

This setting enables menu or customization on the infotainment screen. Note that some customizations, although displayed on the infotainment screen, must be activated in the corresponding category to be enabled.

This setting enables a menu in the instrument cluster (Settings > Vehicle Settings). "Settings menu in the instrument cluster" has to be enabled (if present).

This setting changes the time format in the Global clock configuration menu. "Global clock configuration in the instrument cluster" has to be enabled.

Note that this setting only works if light switch is in auto mode.

This setting enables an option in the instrument cluster (Settings > Vehicle Settings), where the feature can be configured. "Settings menu in the instrument cluster" has to be enabled (if present).

For this customization to take effect, set the light control switch to the auto lamp position. The DRL will automatically turn on when you're driving.

For this customization to take effect, set the light control switch to the auto lamp position. The DRL will automatically turn on when you're driving.

Note that this setting only works if your car is equipped with an LED DRL bulb.

This setting enables menu or customization within the 'Driver assistance' menu on the infotainment screen. To ensure that this customization takes effect, also activate the "Enable 'Driver assistance' menu in the infotainment display" setting. Note that some customizations, although displayed on the infotainment screen, must be activated in the corresponding category to be enabled.

This setting allows the fog lights to remain on with the high beams if the fog lights were turned on initially. It doesn't automatically turn on the fog lights when the high beams are activated.

Automatically locks all doors when you reach speed greater than 20 km/h (12.4 mph).

Automatically locks all doors when you reach speed greater than 20 km/h (12.4 mph).

If all doors are locked, auto-unlock all doors when the vehicle is turned off and the driver's door is open.

If all doors are locked, auto-unlock all doors when the vehicle is turned off and the driver's door is open.

This setting allows you to access a menu or customization within the "Vehicle" menu on the infotainment screen. To ensure it works, also activate the "Enable the "Driver Assistance" menu in the infotainment display" setting. Note that some customizations, although displayed on the infotainment screen, must be activated in the corresponding category to take effect. Additionally, although some settings are displayed on the infotainment screen, they may not be available for the specific vehicle.

Note for some vehicles you may also need to set re-lock time by "Re-lock doors automatically if you unlock, but don't open a door within…" for this to work.

Note for some vehicles you may also need to set re-lock time by "Re-lock doors automatically if you unlock, but don't open a door within…" for this to work.

Need to click lock button on remote twice to get audible confirmation.

Need to click lock button on remote twice to get audible confirmation.

Note: To unlock all doors, you need to press the unlock button twice within an interval of no more than 3 seconds.

Note: To unlock all doors, you need to press the unlock button twice within an interval of no more than 3 seconds.

This setting enables menu or customization on the infotainment screen. Note that some customizations, although displayed on the infotainment screen, must be activated in the corresponding category to be enabled.

This setting allows you to access a menu or customization within the "Vehicle" menu on the infotainment screen. To ensure it works, also activate the "Enable the "Driver Assistance" menu in the infotainment display" setting. Note that some customizations, although displayed on the infotainment screen, must be activated in the corresponding category to take effect. Additionally, although some settings are displayed on the infotainment screen, they may not be available for the specific vehicle.

To open the windows, press the remote control unlock button once, then press it again and hold for at least three seconds.

To open the windows, press the remote control unlock button once, then press it again and hold for at least three seconds.

Note you may also need to enable 'Global windows close' for this to work.

This setting allows you to access a menu or customization within the "Vehicle" menu on the infotainment screen. To ensure it works, also activate the "Enable the "Driver Assistance" menu in the infotainment display" setting. Note that some customizations, although displayed on the infotainment screen, must be activated in the corresponding category to take effect. Additionally, although some settings are displayed on the infotainment screen, they may not be available for the specific vehicle.

This setting allows you to access a menu or customization within the "Vehicle" menu on the infotainment screen. To ensure it works, also activate the "Enable the "Driver Assistance" menu in the infotainment display" setting. Note that some customizations, although displayed on the infotainment screen, must be activated in the corresponding category to take effect. Additionally, although some settings are displayed on the infotainment screen, they may not be available for the specific vehicle.