Volkswagen Caravelle

You may also need to reset your MFD (in-dash multi-function display) to 'Factory setting' for this customization to work.

Note that this setting may appear on your MFD (in-dash multi-function display), but without a value, if that's the case, your car doesn't have the required hardware for that feature.

On some vehicles the DRLs are hardwired and cannot be turned off electronically. This customization has no effect on such vehicles.

Which start screen logos are supported is dependent on the module's firmware. Please note that setting a start screen logo which isn't supported may cause a "01543 - incorrectly coded" fault code - returning the original logo should fix the issue.

Please note that this customization requires a washer fluid level sensor.

Please note that this customization requires a washer fluid level sensor.

To enable this option, the climate control temperature with remote start must be set to a fixed value.

Which start screen logos are supported is dependent on the module's firmware. Please note that setting a start screen logo which isn't supported may cause a "01543 - incorrectly coded" fault code - returning the original logo should fix the issue.

Note that this setting may appear on your MFD (in-dash multi-function display), but without a value, if that's the case, your car doesn't have the required hardware for that feature.

If activating this setting, make sure that Bluetooth availability is set to ON.

To use this retrofit setting, your infotainment unit must support CarPlay and have a retrofitted USB port compatible with CarPlay, along with a CarPlay license.

Please note that this customization requires infotainment reboot.

This customization requires that your car is equipped with a satellite navigation system.

Please note that this customization requires infotainment reboot.

This customization may get rejected when saving on vehicles that have unit settings in their MFD. If your vehicle doesn't have unit settings in its MFD and the setting still gets rejected, you could also try setting the "Instrument cluster region" customization to a metric or imperial unit using country.

This customization may get rejected when saving on vehicles that have unit settings in their MFD. If your vehicle doesn't have unit settings in its MFD and the setting still gets rejected, you could also try setting the "Instrument cluster region" customization to a metric or imperial unit using country.

This customization may get rejected when saving on vehicles that have unit settings in their MFD. If your vehicle doesn't have unit settings in its MFD and the setting still gets rejected, you could also try setting the "Instrument cluster region" customization to a metric or imperial unit using country.

This customization may get rejected when saving on vehicles that have unit settings in their MFD. If your vehicle doesn't have unit settings in its MFD and the setting still gets rejected, you could also try setting the "Instrument cluster region" customization to a metric or imperial unit using country.

This customization may get rejected when saving on vehicles that have unit settings in their MFD. If your vehicle doesn't have unit settings in its MFD and the setting still gets rejected, you could also try setting the "Instrument cluster region" customization to a metric or imperial unit using country.

This customization may get rejected when saving on vehicles that have unit settings in their MFD. If your vehicle doesn't have unit settings in its MFD and the setting still gets rejected, you could also try setting the "Instrument cluster region" customization to a metric or imperial unit using country.

This customization may get rejected when saving on vehicles that have unit settings in their MFD. If your vehicle doesn't have unit settings in its MFD and the setting still gets rejected, you could also try setting the "Instrument cluster region" customization to a metric or imperial unit using country.

This customization may get rejected when saving on vehicles that have unit settings in their MFD. If your vehicle doesn't have unit settings in its MFD and the setting still gets rejected, you could also try setting the "Instrument cluster region" customization to a metric or imperial unit using country.

You also need to enable TP and RDS in your radio's menu for this to work. Also keep in mind that you might need to wait an hour or so for the feature it to start receiving messages.

On some vehicles the DRLs are hardwired and cannot be turned off electronically. This customization has no effect on such vehicles.

You may also need to reset your MFD (in-dash multi-function display) to 'Factory setting' for this customization to work.

You may also need to reset your MFD (in-dash multi-function display) to 'Factory setting' for this customization to work.

This setting only applies to cars that have a rear view camera installed.