All fault codes

P0302: Cylinder 2 Misfire Detected

MediumPowertrainIgnition

Symptoms

  • Rough idle that smooths out at higher RPM
  • Hesitation when accelerating
  • Flashing check engine light under load
  • Sulfur or raw fuel smell

Common causes

  • Worn or fouled spark plug on cylinder 2
  • Failing ignition coil on that cylinder
  • Faulty or clogged fuel injector
  • Low compression from valve or piston ring wear

What to do?

Swap the coil and spark plug from cylinder 2 with a neighbouring cylinder, clear the code, and drive. If the misfire follows the parts, you have your culprit. If it stays on cylinder 2, the injector or a compression issue is likely - run a compression or leakdown test.